Uncategorized

Stampin’ Up! Animal Outing Birthday

Today is Sunday and I hope you attend the church or synagogue of your choice. It is a great day that the Lord has made, so let us rejoice and be glad in it! Psalm 118:24

My card for today is for a young lad’s birthday and I hope he enjoys it. Animal Outing is so adorable. The design for this card was inspired by a challenge over at As You See It .

Challenge #186

Let’s get on with it, shall we?

Here is what I created, and it is going to come as a shock to those who follow me regularly. They know I do not like CHARTREUSE, and it dominates this card in the form of Lemon Lime Twist. This is my very, very least favorite color, but sometimes it is appropriate. I know I will get a lot of flak! In for a penny, in for a pound, as they say.

4

Shocking isn’t it? But, I think children like bright colors and there are two shades of green (if you can call one of them green) in the Animal Expedtition Designer Series Paper that is the basis for my card.

The top flag shows the different animals and I stamped the sentiment from Perennial Birthday in Shaded Spruce on this flag. The next one down is another paper from Animal Expedition, as is the bottom flag. The fourth flag is Shaded Spruce card stock and was put through the Big Shot in one of the Petal Pair Textured Impressions Embossing Folders. All flag ends were punched with the Banner Triple Punch.1These were all adhered with Liquid Glue to a Lemon Lime Twist mat that had been dry embossed with the Subtle 3D Dynamic Textured Embossing folder. I had planned to use a different TIEF, but it ‘fought’ with the flags, so it had to be rather plain. I really like the texture this folder gives a project.

The card front was adhered to the card base with Liquid Glue also, and a length of 3/16″ braided Linen Trim was wrapped around and tied in a bow. To secure the bow in place I used a  Glue Dot. I usually photograph outside and it was windy to beat the band, blowing the tails of my bow all over the place. My apologies for this.

The inside of the card has a double mat; more (I can’t believe I used so much of this color!) Animal Expetion DSP  matted to a Shaded Spruce mat. The sentiment liner was stamped with a character from the Animal Outing stamp set in Soft Suede and colored with Stampin’ Blends. Colors used were Light Night of Navy, Light and Dark Smoky Slate, Ivory (ears), Light Daffodil Delight and the Color Lifter. This was used on the bird and the ivory horn, which I had colored with light Smoky slate.

5

The sentiment, from Picture Perfect Birthday, was stamped in Shaded spruce. I hand colored the frog stamp, which is in Animal Outing, with my Lemon Lime Twist Stampin’ Write Marker and stamped the rest in Shaded Spruce. This liner was Liquid Glued to the double mat and into the card base.

I just couldn’t bear more Lemon Lime Twist, so used the giraffe printed Animal Expedition DSP for the envelope flap, and fussy cut one of  he smaller Rhinoceros from a scrap of the DSP. Liquid Glue secured it to the front.

In my opinion this card is child worthy in spite of the color used. Please leave comments below. My shoulders are broad, and I can take it!

Disclaimer: I will NEVER LIKE chartreuse, no matter what it is called nor how much I have to use it on a card.

Host Code: EV7ETS99 good through the end of October.

Go here to learn the details on using the host code and my customer loyalty rewards program.

Next week expect to see some examples from the new Snowflake Showcase, which customers will be able to order beginning November 1. I have seen a few projects with this showcase and they are fantastic

CARD CUTS: Crumb Cake: card base 4-1/4″ x 11″ scored at 5-1/2″; Lemon Lime Twist: front 4-1/8″ x 5-3/8″; Animal Outing Designer Series Paper: flags 1-1/2″ x 3-34″, 1-1/4″ x 3-1/2″, 2″ x 3″, inside mat 3-3/4″ x 5″; Shaded Spruce: embossed flag 1″ x 4-1/4″, inside mat 4″ x 5-1/4″; Whisper White: inside liner 3-1/2″ x 4-3/4″.

Product List

Uncategorized

Stampin’ Up! Animal Outing Shutter Birthday

Good morning Everyone! Another hot one today, and dry again. The combines are rolling, day and night. I urge you all to be aware of big machinery on the roads as they travel from field to field and home. Harvest is a dangerous time and requires diligence from all of us.

My card today is purely fun! The Animal Outing stamp set and dies (purchase as a bundle and save 10%!) are so much fun, and the dies also cut the Animal Expedition Designer Series Paper, which I also used for this card. As I said, ‘pure fun!’

I love a gate-fold card, and if there is a working mechanism inside, so much the better. This gate-fold is also a shutter card. Take a look.

wild wing creations-6

I began with a Whisper White Thick Card Stock card base, but instead of the usual center score, this one is scored at 2-1/8″ and 6-3/8″ to make the gate-fold. For the front panels I used Call Me Clover for the mats and Liquid Glue to adhere  some of the Animal Expedition DSP over the mats. How cute is that?

wild wing creations-5

For the inside, another Call Me Clover mat supports a different piece of the Animal Expedition DSP. Liquid Glue adheres the two pieces together before punching the hole, pretty much centered, with my 2-1/4″ Circle Punch. You could also use the 6th Layering Circles Framelit (counting the smallest as one), which is very slightly larger than the punch. Place Stampin’ Dimensionals across the top and bottom of this piece and set aside.

wild wing creations-1

The mechanism is made from two pieces of Call Me Clover Card Stock, cut 3-1/2″ x 4″. Placing the 4″ side at the top of your Score Board, score at 3-1/2″ on both pieces. Now, this next part may seem tricky, but it really isn’t. Find the center of these two pieces. This would be at 2″ for the long side and 1-3/4″ for the short side. Make a dot with a pencil at the spot where these two meet. This is easy using your grid paper as a guide.

Now, draw a line from the corner (on the end away from the score line) to this dot. Draw another line from the other corner to the dot, making a triangle. Using your Paper Snips, cut this triangle away and use it to mark the second piece. Cut this away also. Fold and burnish the score lines. Cut the tiny tips off the points.

inside

With the fold as a mountain, lay the piece flat on your card base, lining up the edge with the fold against inside of the score line on the card base and centering vertically. This will put the green piece across the center of your card base, NOT on the flap. Apply adhesive (I used Liquid Glue) to the 1/2″ piece and fold the flap over, holding it firmly to adhere. Repeat with the other side. These form a diamond shaped opening when the card is opened. You can see how this looks in the top photo of the standing card.

Now adhere the center panel with the hole, lining up the top and bottom edges with the top and bottom of the card base, and centering it on the center panel. See how easy that was?? Now, all that is left is to add the sentiment. If this isn’t clear enough, go to Jan B Cards to watch her video, or to Stamps n Lingers to see how my friend Mary made her shutter card. I put mine together the same way Jan B did, but you can do it either way.

 

I used the sentiment from Best Birds and stamped it in the center of the open diamond, slightly toward the top to leave room below for the little frog on a branch. Frog is from Animal Outing. (You could use your cut out center panel to mark a circle on your card base and stamp BEFORE assembling) Both the sentiment and the froggy branch were stamped in Call Me Clover.

wild wing creations-1

The inside is finished. And the outside is finished. I love this shutter card, it is so interactive. A child of ANY age would love it as well.

The belly band adds another dimension to the card as well as helping to hold it shut. Cut a 1″ strip from Call Me Clover . Holding one end just past the center opening of the card, fold it completely around the card. Remove it from the card and line up the sides to get your folds straight before burnishing. Cut off any extra, leaving about a 1″ overlap and Liquid Glue it together.

wild wing creations-4

Decorate as you wish. You could use the circle cut from the center panel and add another sentiment. I chose to use the framelit for the rhinoceros from the Animal Outing Bundle, and cut one from the coordinating DSP. I also cut one from Call Me Clover and Liquid Glued it to the back of the DSP for more support. The DSP is not as thick as card stock and I didn’t want it to bend too easily. Liquid Glue adheres this over the joined edges of the band.

Close the card and slip the band over. Wow! Is this ever cute? The animals in this bundle and the DSP are so adorable.

The envelope sports a stamped rhinoceros on the front, stamped in Gray Granite, and more of the DSP on the flap. I colored the bird on his horn with a Balmy Blue Stampin’ Write Marker and his bill with the So Saffron Marker. The grass is Call Me Clover.

This is fun to make and really doesn’t take very long at all.

Please leave comments below and don’t forget to redeem your Bonus Days coupons.

CLEARANCE RACK

I might also mention that the Clearance Rack has been updated, and things are going fast. Fast Fuse and Fast Fuse Refills are 1/2 price, but they are only there while supplies last.

For any orders (before taxes and shipping) of $50 up to $150, use the host code below for a free gift from me when you order from my online store. Click here to get the details. For orders over $150 don’t use the host code and you will still receive the free gift. You will also be earning Wild Bird Eggs, the details of which are on the same page.

September Host Code: RKS93T47

For a $50 order you will be eligible to receive the September Online Class Tutorials for Spooky Sweets.

Card Cuts: Whisper White Thick Card Stock: card base 5-1/2″ x 8-1/2″, scored at 2-1/8″ and 6-3/8″; Call Me Clover: front mats (2) 2″ x 5-3/8″, center panel inside mat 3″ x 5-1/2″, shutter (2) 3-1/2″ x 4″, belly band 1″ x 10-1/2″, rhinoceros 2-1/2″ x 2-1/2″; Animal Expedition Designer Series Paper: front panels 1-7/8″ x 5-1/4″, inside center panel 2-7/8″ x 5-3/8″, piece to cut animal to decorate belly band.

Product List